Yamaha AVENTAGE RXA780BL Owner'S Manual Download

Page: 164 / 201

The unit does not detect the media server (PC/NAS)

The media sharing setting is not correct.

Configure the sharing setting and select the unit as a device to which music

contents are shared. For details, see the following:

– “Media sharing setup on media servers (PCs/NAS)” (p.84)

Some security software installed on your media server is blocking the access

of the unit to your media server.

Check the settings of security software installed on your media server.

The unit and media server are not in the same network.

Check the network connections and your router settings, and then connect the unit

and the media server to the same network.

The MAC address filter is enabled on the unit.

In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or

specify the MAC address of your media server to allow it to access to the unit. For
details, see the following:

– “Setting the MAC address filter” (p.133)

The files in the media server (PC/NAS) cannot be
viewed or played back

The files are not supported by the unit or the media server.

Use the file format supported by both the unit and the media server. For

information about the file formats supported by the unit, see the following:

– “Supported file formats” (p.188)

The Internet radio cannot be played

The selected Internet radio station is currently not available.

There may be a network problem at the radio station, or the service may have

been stopped. Try the station later or select another station.

The selected Internet radio station is currently broadcasting silence.

Some Internet radio stations broadcast silence at certain of times of the day. Try

the station later or select another station.

Access to the network is restricted by the firewall settings of your network

devices (such as the router).

Check the firewall settings of your network devices. The Internet radio can be

played only when it passes through the port designated by each radio station. The
port number varies depending on the radio station.

The iPhone does not recognize the unit when using
AirPlay

The unit is connected to a multiple SSID router.

Access to the unit might be restricted by the network separation function on the

router. Connect the iPhone to the SSID which can access the unit. (Connect it to

the Primary SSID at the top of the list.)

164

Summary of Contents for AVENTAGE RXA780BL










































































































































































































Search results

Summary of Contents for AVENTAGE RXA780BL

Reviews:

Related manuals for AVENTAGE RXA780BL

Brands by name

Popular brands

Yamaha AVENTAGE RXA780BL, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RXA780BL

Reviews:

Related manuals for AVENTAGE RXA780BL

Brands by name

Popular brands