manualshive.com logo in svg

Yamaha AVENTAGE RX-A880, Owner'S Manual

The Yamaha AVENTAGE RX-A880 is a top-notch audio receiver that delivers exceptional sound quality and immersive surround sound experience. To get the most out of this remarkable device, make sure to download the comprehensive Owner's Manual from our website for free. Learn how to optimize your audio settings and unlock the receiver's full potential.

Share
Download
background image

Enjoying music in multiple rooms

Playing back music in multiple rooms

The multi-zone function allows you to play back different input sources in the room
where the unit is installed (Main zone) and in another room (Zone2).
For example, while you are watching TV in the living room (Main zone), another person
can listen to radio in the study room (Zone2).
Two methods for connecting the device that will be used in Zone2 to the unit are
available; using the unit’s internal amplifier or using an external amplifier. When using
an external amplifier, you can select 7.1/5.1.2-channel speaker system in Main zone.

• “Connecting Zone2 speakers using the unit’s internal amplifier” (p.56)
• “Connecting Zone2 speakers using an external amplifier” (p.58)

Living room (Main zone)

Study room (Zone2)

NOTE

▪ Digital and analog audio sources (including radio), Bluetooth, USB, and network sources can be output to

Zone2. To listen to the playback of an external device in Zone2, you need to connect the device to the
AUDIO jacks (AV 1-2, AUDIO 1-5 or PHONO jacks) of the unit.

▪ “Main Zone Sync” allows you to play back the same audio output in Main zone as Zone2. When “Main

Zone Sync” is selected as the Zone2 input, the Zone2 input automatically switches in conjunction with the
input source selected in the main zone.

▪ The party mode allows you to play back the same audio output in Main zone as Zone2, whatever the input

audio signal type. Multichannel sources are mixed down to 2 channels and output to the Zone2. For
details on the party mode, see the following:

– “Enjoying the same source in multiple rooms (party mode)” (p.60)

 

Connecting Zone2 speakers

n

Connecting Zone2 speakers using the unit’s internal
amplifier

Connect the speakers placed in Zone2 to the unit with a speaker cable.

NOTICE

▪ Unplug the unit’s power cable from an AC wall outlet before connecting the speakers.

To enable the multi-zone function, configure the necessary speaker settings. For

details, see the following:

• “Available configurations for advanced speaker systems using the unit’s internal

amplifier” (p.27)

• “Assigning speaker configuration” (p.41)
• “Setting your speaker system” (p.110)

NOTE

 You can also connect Zone2 speakers using an external amplifier. For details, see the following:

▪ “Connecting Zone2 speakers using an external amplifier” (p.58)

 

 

En

56

Summary of Contents for AVENTAGE RX-A880












































































































































































































Reviews:

No comments

Related manuals for AVENTAGE RX-A880

Uconnect Touch 8.4 Owner'S Manual Supplement preview
Touch 8.4
Brand: Uconnect Pages: 123
u-blox EVK-F9T Quick Start preview
EVK-F9T
Brand: u-blox Pages: 2
Jensen VM9411 Instruction Manual preview
VM9411
Brand: Jensen Pages: 110
Williams Sound Personal PA Receiver PPA R35N Instructions For Use And Care Manual preview
Personal PA Receiver PPA R35N
Brand: Williams Sound Pages: 6
Horizon Hobby RMTTI01 User Manual preview
RMTTI01
Brand: Horizon Hobby Pages: 23
Multi-Room/Multi-Source RX-1028VBK Brochure & Specs preview
RX-1028VBK
Brand: Multi-Room/Multi-Source Pages: 7
Acesori PocketCast User Manual preview
PocketCast
Brand: Acesori Pages: 2
Pyle PLML50FB User Manual preview
PLML50FB
Brand: Pyle Pages: 18
D+M Group AVR-E400 Instructions Manual preview
AVR-E400
Brand: D+M Group Pages: 19
Edge Wireless WMSK-1 Manual preview
WMSK-1
Brand: Edge Wireless Pages: 3
Yanglousi Technology H-011 Instructions preview
H-011
Brand: Yanglousi Technology Pages: 3
Marantz M-CR511 Owner'S Manual preview
M-CR511
Brand: Marantz Pages: 133
S.E.M. Z-789 Quick Start Manual preview
Z-789
Brand: S.E.M. Pages: 6
AFi MR-440 Instruction Manual preview
MR-440
Brand: AFi Pages: 4
Trikdis RM14 User Manual preview
RM14
Brand: Trikdis Pages: 19
Magnetek Enrange CAN-6 Instruction Manual preview
Enrange CAN-6
Brand: Magnetek Pages: 25
Trevi SB 8350TV User Manual preview
SB 8350TV
Brand: Trevi Pages: 24
FTE Maximal MAX S122 Manual preview
MAX S122
Brand: FTE Maximal Pages: 38

Brands by name

Popular brands

Load more brands