En
127
Sound
Information
Displays information about the current audio signal.
Lipsync
Delay Enable
Enables/disables the “Lipsync” adjustment configured in “Auto/Manual Select” in the “Setup” menu.
Auto/Manual Select
Selects the method to adjust the delay between video and audio output.
Adjustment
Adjusts the delay between video and audio output manually.
DSP Parameter
DSP Level
Adjusts the sound field effect level.
Initial Delay
Adjusts the delay between the direct sound and presence sound field generation.
Room Size
Adjusts the broadening effect of the presence sound field.
Liveness
Adjusts the loss of the presence sound field.
Reverb Time
Adjusts the decay time of the rear reverberant sound.
Reverb Delay
Adjusts the delay between the direct sound and reverberant sound generation.
Reverb Level
Adjusts the volume of the reverberant sound.
Surround Initial Delay
Adjusts the delay between the direct sound and surround sound field generation.
Surround Room Size
Adjusts the broadening effect of the surround sound field.
Surround Liveness
Adjusts the loss of the surround sound field.
Surround Back Initial Delay
Adjusts the delay between the direct sound and surround back sound field generation.
Surround Back Room Size
Adjusts the broadening effect of the surround back sound field.
Surround Back Liveness
Adjusts the loss of the surround back sound field.
Surround Decoder
Decode Type
Selects a surround decoder to be used in combination with the selected sound program.
Center Spread
Selects whether to spread the center channel signals to left and right when 2-channel source is played.
Center Image
Adjusts the center localization (broadening effect) of the front sound field.
9ch Stereo
Level
Adjusts the entire volume.
Front / Rear Balance
Adjusts the front and rear volume balance.
Left / Right Balance
Adjusts the left and right volume balance.
Height Balance
Adjusts the height volume balance using the presence speakers.
Monaural Mix
Enables/disables monaural sound output.
Reset
Restores all default settings.
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Volume
Max Volume
Sets the limit value of the volume.
Initial Volume
Sets the initial volume for when this receiver is turned on.
Pure Direct Mode
Selects whether to output video signals during the Pure Direct mode.
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP 3D effect level when the volume is adjusted.
Virtual Speaker
VPS
Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers.
VSBS
Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers.
Ultra Low Jitter PLL Mode (RX-A3080 only)
Enables/disables the jitter elimination function.
DAC Digital Filter (RX-A3080 only)
Selects the digital filter type of the audio DAC (digital-to-analog converter).
Balance Input Attenuator (RX-A3080 only)
Selects whether to activate the attenuator for the balance input to avoid sound distortion.
Menu
Item
Function
Page