Yamaha AVENTAGE RX-A3080 Owner'S Manual Download Page 121

Page: 121 / 189

121

Adaptive DRC (A.DRC)

Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when

the volume level is adjusted. When it is set to “On”, it is useful for listening to playback at a low

volume at night.

Settings

If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a high

volume.

■

Dialogue (Dialog)

Adjusts the volume or perceive height of dialogue sounds.

Dialogue Level (Dialog Lvl)

Adjusts the volume of dialogue sounds. If dialogue sounds cannot be heard clearly, you can
turn up its volume by increasing this setting.

Setting range

0 to 3

This setting is not available when DTS:X content is played back, or when the Dolby Surround or Neural:X decoder

is working.

DTS Dialogue Control (DTS Dialog)

Adjusts the volume of dialogue sounds for DTS:X contents.

Setting range

0 to 6

This setting is available only when DTS:X content which supports the DTS Dialogue Control feature is played back.

Dialogue Lift (Dialog Lift)

Adjusts the perceived height of dialogue sounds. If the dialogue sounds as if it is coming from
below the TV screen, you can raise its perceived height by increasing this setting.

This setting is available only when one of the following conditions is met.

– One of the sound programs (except for 2ch Stereo and 9ch Stereo) is selected when front presence speakers are

used.

– Virtual Presence Speaker (VPS) (p.77) is working.

(You may hear dialogue sounds from the surround speakers depending on the listening position.)

Setting range

0 to 5 (The bigger the value the higher the position)

■

Lipsync (Lipsync)

Adjusts the delay between video and audio output.

Setting range

0 ms to 500 ms (1 ms increments)

This setting is available only when “Delay Enable” (p.136) in the “Setup” menu is set to “Enable” (default).

Off (Off)

The dynamic range is not automatically adjusted.

On (On)

Automatically adjusts the dynamic range when YPAO Volume is enabled.

Volume: low

Volume: high

Input level

Off

Out

Ideal position

Summary of Contents for AVENTAGE RX-A3080






























































































































































































Search results

Summary of Contents for AVENTAGE RX-A3080

Reviews:

Related manuals for AVENTAGE RX-A3080

Brands by name

Popular brands

Yamaha AVENTAGE RX-A3080, Owner'S Manual

Search results

Summary of Contents for AVENTAGE RX-A3080

Reviews:

Related manuals for AVENTAGE RX-A3080

Brands by name

Popular brands