Yamaha Aventage RX-A2A User Manual Download Page 308

Page: 308 / 388

The unit enters standby mode automatically

(

The sleep timer worked.

Turn on the unit and start playback again.

(

The auto-standby function activated because the unit was not used for the specified time.

To disable the auto-standby function, set “Auto Power Standby” in the “Setup” menu to “Off”. For
details, see the following:

(

“Setting the amount of time for the auto-standby function” (p.262)

(

The speaker impedance setting is incorrect.

Set the speaker impedance to match your speakers. For details, see the following:

(

“Setting the speaker impedance” (p.201)

(

The protection circuitry has been activated because of a short circuit.

Twist the bare wires of each speaker cable firmly and reconnect to the unit and speakers. For details, see
the following:

(

“Connecting the speaker” (p.66)

(

The protection circuitry has been activated because of too high volume.

Turn down the volume. If “ECO Mode” in the “Setup” menu is set to “On”, set it to “Off”. For details, see
the following:

(

“Setting the use of the eco mode” (p.263)

308

TROUBLESHOOTING > When any problem appears

Summary of Contents for Aventage RX-A2A





































































































































































































































































































































































































Search results

Summary of Contents for Aventage RX-A2A

Reviews:

Related manuals for Aventage RX-A2A

Brands by name

Popular brands

Yamaha Aventage RX-A2A, User Manual

Search results

Summary of Contents for Aventage RX-A2A

Reviews:

Related manuals for Aventage RX-A2A

Brands by name

Popular brands