Yamaha Aventage RX-A2A User Manual Download

Page: 138 / 388

Playing back music stored on a USB flash drive

Playback of USB flash drive content

You can play back music files stored on a USB flash drive on the unit.

Connect the USB flash drive to the USB jack.

PHONES

USB

YPAO

5V 1A

The unit (front)

USB flash drive

Select “USB” as the input source.

The browse screen is displayed on the TV. If playback is ongoing on your USB flash drive, the
playback screen is displayed.

Select an item.

Playback starts and the playback screen is displayed.

NOTE

(

To return to the top level while on the browse screen, hold down RETURN on the remote control.

(

To switch the screen mode browse/playback/off, press DISPLAY.

(

If the USB flash drive contains many files, it may take time to load them.

(

The maximum limits of playback are 500 music files. The folder structure of your USB flash drive may reduce the maximum limits.

(

Stop playback of the USB flash drive before disconnecting it from the USB jack.

(

Connect a USB flash drive directly to the USB jack of the unit. Do not use extension cables.

(

The unit cannot charge USB flash drive while it is in standby mode.

(

You can configure the shuffle/repeat settings for playback of contents.

(

You can register contents as shortcuts and access them directly.

138

PLAYBACK > Playing back music stored on a USB flash drive

Summary of Contents for Aventage RX-A2A





































































































































































































































































































































































































Search results

Summary of Contents for Aventage RX-A2A

Reviews:

Related manuals for Aventage RX-A2A

Brands by name

Popular brands

Yamaha Aventage RX-A2A, User Manual

Search results

Summary of Contents for Aventage RX-A2A

Reviews:

Related manuals for Aventage RX-A2A

Brands by name

Popular brands