Basic Operations and More
22 •
N3X
Owner’s Manual
The metronome feature is convenient for practicing with an accurate tempo.
1
Press [METRONOME] to start the metronome.
While the metronome sounds, a dot at the right side of the LED display and the
lamp of the metronome button flash on and off to the tempo.
2
Press [METRONOME] again to stop the metronome.
Selecting the Beat
While holding down [METRONOME], press one of the C3–F3
keys. The selected value is shown on the display while both
controls are held.
Only the first beat is accented with a bell sound when set to a value other than 0.
Adjusting the Metronome volume
While holding down [METRONOME], press one of the C1–G2 keys to set the vol-
ume. The specified value is shown on the display while both controls are held.
Using the Metronome
1, 2
120.
The beat lamp
flashes at the current
tempo
Default setting: 0 (No 1st beat accent)
NOTE
The Beat of the metronome is restored to
the default setting when the power is turned
off.
Display
Key
Beat
Display
Key
Beat
0
C3
0
(no 1st beat accent)
4
D
#
3
4
2
C
#
3
2
5
E3
5
3
D3
3
6
F3
6
0
Beat
C3
F3
Highest key (C7)
Setting range: 1–20
Default setting: 15
NOTE
The metronome volume setting is retained
even when the power is turned off.
C1
(1)
G2
(20)
D2
(15)
The volume level increases as you press higher keys.
max.
min.
Lowest
key (A-1)