Playing the Keyboard
N3X
Owner’s Manual
• 15
WARNING
Use only the AC power cord supplied with the instrument. If the supplied power cord is lost or damaged and needs
to be replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock haz-
ard!
WARNING
The type of AC power cord provided with the instrument may be different depending on the country in which the
instrument was purchased. (In some areas a plug adaptor may be provided to match the pin configuration of the AC
wall outlets in your area.) Do NOT modify the plug provided with the instrument. If the plug will not fit the outlet,
have a proper outlet installed by a qualified electrician.
CAUTION
When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or mal-
function occurs, immediately turn off the power switch and disconnect the plug from the outlet.
NOTE
When disconnecting the power cord, first turn off the power, then follow this procedure in reverse order.
1
Grip the control panel located at the bottom left of
the instrument and slide it out towards you.
NOTICE
Do not pull on the [MASTER VOLUME] control to slide out the con-
trol panel.
2
Turn down the [MASTER VOLUME] control to
“MIN.”
3
Turn on the switch located on the bottom left of
the keyboard to turn the power on.
The [POWER] indicator located below the left end of the key-
board lights up. The display indicators flash in a pattern, indi-
cating the instrument is currently starting up, and stop flashing
when startup is completed.
NOTICE
Do not press any keys until the instrument has completely started up (approx. ten seconds after turning on the switch).
Doing so may cause some keys to not sound normally.
4
Playing the keyboard.
While playing the keyboard, adjust the volume level by using the [MASTER VOLUME] control located at the
left of the panel.
Turning the Power On/Off
Lights up
Off
On
Power switch
Increases
the level.
Decreases
the level.