Yamaha AVANTAGE RX-A2A User Manual Download

Page: 299 / 391

Select “Execute”.

In process, “Executing” is displayed on the front display. And “Restore Executing” is displayed on the TV.

When the process finishes, “Complete” is displayed (“Restore Complete” on the TV). The unit will restart
automatically a few seconds later.

If “Error” appears on the front display (“Restore Failed” on the TV), check the following and start the process
again.

(

Check that the file is stored in the route of the USB flash drive.

NOTE

(

“Restore” is effective after backing up all the settings.

(

Do not turn off the unit during the restoring process. Otherwise, the settings may not be restored correctly.

(

You can also restore all the settings in “Backup/Restore” in the “Setup” menu.

Summary of Contents for AVANTAGE RX-A2A








































































































































































































































































































































































































Search results

Summary of Contents for AVANTAGE RX-A2A

Reviews:

Related manuals for AVANTAGE RX-A2A

Brands by name

Popular brands

Yamaha AVANTAGE RX-A2A, User Manual

Search results

Summary of Contents for AVANTAGE RX-A2A

Reviews:

Related manuals for AVANTAGE RX-A2A

Brands by name

Popular brands