92
REMOTE CONTROL FEATURES
You can control your TV and other components by setting
the appropriate remote control code for each input source.
For a complete list of available remote control codes, refer
to “LIST OF REMOTE CONTROL CODES” at the end of
this manual.
The following table shows the default component in the
“Library (component category)” column and the remote
control code for each input source.
Remote Control Code Default Settings
You may not be able to operate your YAMAHA component even
if a YAMAHA remote control code is initially set as listed above.
In this case, try setting other YAMAHA remote control codes.
1
Press one of the input selector buttons or
/
to select the component you want to
set up.
2
Press CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice.
3
Press the numeric buttons (0 to 9) to enter
the five-digit remote control code for the
component to be used.
The TRANSMIT indicator on the remote control
flashes twice, and the remote control code for the
selected component is set.
y
Refer to “LIST OF REMOTE CONTROL CODES” at the
end of this manual.
• If the manufacturer of your component has more than one
code, try each of them until you find the correct one.
• If you do not press any buttons within 30 seconds in step
3, the setup process is canceled. If this happens, repeat the
setup procedure.
• If you enter the code number “9980”, the remote control
code previously set for the selected component is cleared.
Setting the remote control code
Input
source
Library
(component
category)
Manufacturer
Default
code
CD
CD
YAMAHA
61907
MD/CD-R
MD
YAMAHA
70888
XM
TUNER
YAMAHA
81918
DVD
DVD
YAMAHA
40539
DTV/CBL
–
–
–
TUNER
TUNER
YAMAHA
81916
V-AUX
–
–
–
DVR
DVR
YAMAHA
51544
–
–
–
–
–
–
Note
Notes
CD
MULTI CH IN
SLEEP
CD-R
XM
DVD
DTV
MD
CBL
TUNER
V-AUX
DVR
TRANSMIT
CODE SET
Flashes
STEREO
1
EFFECT
STANDARD
5
SPEAKERS
9
MUSIC
2
SELECT
6
ENHANCER
0
ENTERTAIN
3
EXTD SUR.
7
NIGHT
10
MOVIE
4
DIRECT ST.
8
STRAIGHT
ENT.
TRANSMIT
Flashes
