30
BASIC SETUP
10
Press
j
/
i
to select the desired setting.
Choices:
YES
, NO
• Select “YES” to complete the setup procedure if
the test tone levels from each speaker were
satisfactory.
• Select “NO” to proceed to the speaker level
adjustment menu in step 12 to balance the output
level of each speaker.
11
Press ENTER to confirm your selection.
• If you selected “YES” in step 10, the setup
procedure is completed and the display returns to
the top “SET MENU” display.
• If you selected “NO” in step 10, the front speaker
level adjustment display appears in the front panel
display.
12
Press
u
/
d
to select a speaker and then
j
/
i
to adjust the balance.
The selected speaker and the front left speaker (or the
surround left speaker) output a test tone in turn.
• Press
i
to increase the value.
• Press
j
to decrease the value.
• Select “FR” to adjust the balance between the front
left and right speakers.
• Select “C” to adjust the balance between the front
left and center speakers.
• Select “SL” to adjust the balance between the front
left and surround left speakers.
• Select “SB” to adjust the balance between the
surround left and surround back speakers.
• Select “SR” to adjust the balance between the
surround left and surround right speakers.
• Select “SWFR” to adjust the balance between the
front left speaker and the subwoofer.
13
Press SET MENU to exit from “BASIC
SETUP”.
;
BASIC SETUP
ROOM:
S >M
L
SUBWOOFER
;;;;
YES
SPEAKERS
;;;;
6spk
SETUP:>OK CANCEL
.
CHECK OK?
;;;;
YES
[]/[]:Up/Down
[<]/[>]:Select
p
p
A-E/CAT.
A-E/CAT.
ENTER
PRESET/CH
A-E/CAT.
A-E/CAT.
ENTER
PRESET/CH
A-E/CAT.
A-E/CAT.
ENTER
PRESET/CH
;
BASIC SETUP
.
FR
;;;;;;;;;;
C
;;;;;;;;;;
SL
;;;;;;;;;;
SB
;;;;;;;;;;
SR
;;;;;;;;;;
SWFR
;;;;;;;;;;
[]/[]:Select
[<]/[>]:Adjust
p
p
MENU
SET MENU
SRCH MODE
