Yamaha ATS-C200 User Manual Download

Page: 72 / 97

No sound can be heard or the sound cuts off intermittently
from a Bluetooth® device

The volume on the Bluetooth device is too low.

Raise the volume on the Bluetooth device.

Bluetooth is not selected as the input source of the sound bar.

Select Bluetooth as the input source.

– “Listening to audio from a Bluetooth® device” (p.40)

Playback is not being performed on the Bluetooth device.

Perform playback on the Bluetooth device.

The audio output destination on the Bluetooth device is not set to the sound bar.

Select the sound bar as the audio output destination on the Bluetooth device.

The connection to the Bluetooth device was terminated.

Connect to the Bluetooth device again.

The sound bar is too far away from the Bluetooth device.

Move the Bluetooth device near the sound bar.

A device emitting electromagnetic waves (such as a microwave oven or a wireless device) is
located nearby.

Do not use the sound bar near devices that emit electromagnetic waves.

Playback is being performed on another Bluetooth device.

Stop the current playback, and perform playback on the other Bluetooth device.

TROUBLESHOOTING > When a problem occurs: Bluetooth®

Summary of Contents for ATS-C200


































































































Search results

Summary of Contents for ATS-C200

Reviews:

Related manuals for ATS-C200

Brands by name

Popular brands

Yamaha ATS-C200, User Manual

Search results

Summary of Contents for ATS-C200

Reviews:

Related manuals for ATS-C200

Brands by name

Popular brands