Yamaha ATS-1010, Owner'S Manual

Page: 10 / 20

6
En
Once you have finished all cable connections and remote control operation, follow the procedure below to start basic
playback operation.
1
(Power): Turns on the unit, or sets it to
standby mode.
2
Input buttons: Select the input source you want
to listen to.
3
UNIVOLUME:
Turns UniVolume mode on and
off. (
☞
P. 7)
4
CLEAR VOICE: Turns Clear voice mode on and
off. (
☞
P. 7)
5
AUDIO DELAY: Turns the audio delay adjusting
mode on and off. (
☞
P. 8)
6
SURROUND/STEREO: Switch surround/stereo
mode. (
☞
P. 7)
7
SUB/–: Adjust the subwoofer
volume. (
☞
P. 8)
8
/–: Adjust the volume. (
☞
P. 8)
9
MUTE: Switches mute mode on and off. (
☞
P. 8)
Before installing batteries or using the remote control,
make sure that you read precautions on the remote control
and batteries in “Notes on the remote control and
batteries” (
☞
P. 1).
Use the remote control within 6 m (20 ft) of the main unit
and point it toward the remote control sensor.
Operation
Remote control
1
2
8
9
5 3
6
4
7
Installing the batteries
Operation range
1
3
2
Within 6 m
(20 ft)