Keyboard Stand Assembly
38
YDP-165, YDP-145, YDP-S55, YDP-S35 Owner’s Manual
2-4
Re-tighten the screws on the upper side of
the back board that were temporarily
fastened in step 2-1.
CAUTION
Be sure to attach the anti-fall brackets. Failure to do so
might result in damage to the instrument or even
injury.
3.
Secure the pedal box.
3-1
Securely tighten the screws on the pedal
box that were attached in step 1.
3-2
Attach the caps to the screw heads.
4.
Set the main unit in place.
Be sure to hold the bottom surface 10 cm or more
inside from the edge of the main unit so that you
do not pinch your hands.
CAUTION
• Be careful not to pinch your hands or drop the main
unit.
• Do not hold anywhere other than the specified
position.
5.
Secure the main unit by tightening
the thick screws (6 × 16 mm).
2-1, 2-4
2-3
2-2
× 2
× 4
× 2
Secure the anti-fall brackets using the screws.
Side
board (L)
Side
board (R)
Thin screws
(4 × 12 mm)
Back board
Anti-fall
bracket (R)
Anti-fall
bracket (L)
Tapping screws
(4 × 20 mm)
Long screws (6 × 25 mm)
3-1
3-2
× 2
Side board (L)
Back board
Side board (R)
Pedal box
Caps
At least
10 cm
At least
10 cm
Back board
Main unit
Align the dowels on the upper
part of the side boards with
the corresponding holes on
the bottom of the main unit.
× 4
Back board
Main unit
Side
board (L)
Side
board (R)
Thick screws
(6 × 16 mm)
Summary of Contents for ARIUS YDP-145
Page 45: ...45 ...
