PERIODIC MAINTENANCE AND ADJUSTMENT
7-29
7
4. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
WARNING! Do not
use a fuse of a higher amper-
age rating than recommended
to avoid causing extensive
damage to the electrical sys-
tem and possibly a fire.
[EWA15131]
5. Place the starter relay into the
original position.
6. Install the starter relay cover by
installing the screw.
7. Turn the key to “ON” and turn on
the electrical circuits to check if
the devices operate.
8. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
EAUU0891
Replacing a headlight bulb or
a front turn signal light bulb
If a headlight bulb or a front turn signal
light bulb burns out, replace it as fol-
lows.
Headlight bulb
ECA10660
NOTICE
_
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with
alcohol or thinner.
_
1. Starter relay
2. Fuse
3. Backup fuse
Specified fuse:
15 A
3
2
1
ZAUU0649
1PNF8199E0.book Page 29 Friday, August 24, 2012 2:00 PM
