23
The SUBKICK consists of a 10" x 5"
birch and Philippine mahogany 7-ply
shell that houses a 16cm, 50-watt low-
frequency driver cone that acts as a
diaphragm for this sub-frequency
capture device. While its large diameter
enables the SUBKICK to capture the
natural low frequencies produced by
the bass drum it can be used in tandem
with a standard kick mic setup, to
deliver an extremely powerful bass
drum tone. The SUBKICK also works
effectively with a floor tom, bass guitar,
low brass, etc.
Size
Shell
Color Finish
Hoop
Lug (Tuning Bolts)
Head (Top & Bottom)
SKRM100
10"x5"
Birch & Philippine Mahogany 7-ply (w/ Rod Clamp)
Vintage Black
Triple Flange Steel (1.6mm)
One-piece Lug (6)
Mesh Head
Type
Polar Pattern
Output Jack
Weight
Frequency Response
Output Impedance
Front Sensitivity
Dynamic
Bi-directional
XLR-3-32 (cannon) jack
Main unit : 4kg, Stand : 3kg
50Hz~2000Hz
9‰
-47dB/ Bar (1kHz)
Model
SPECIFICATIONS
Russ Miller's idea put into reality. Large diameter diaphragm
captures bass drum sub-frequencies.
It looks a bit like a stretched out tom
laid on its side but its actually a sub
bass drum that offers an original
sound from its unique design.
Measuring 12-inches in diameter
with a 22-inch depth, the DAXDAD
is made with a 7-ply birch and
Philippine mahogany shell formed
with our original Air-Seal System. It's sound is powerful with a
long sustain, and by changing tension on the front and batter
heads, a wide range of tonal variations can be produced.
New sound widens
your tonal palette
Floating drum
system offers
stability when
performing
Four air holes
Size
Shell
Color Finish
Hoop
Lug
Tuning Bolts
Head
BD12DD
12"x22"
Birch & Philippine Mahogany 7-ply
Vintage Natural
Triple Flange Steel (1.6mm)
Separate Lug
6
Remo Pinstripe
Remo Pinstripe
Front
Batter
Model
SPECIFICATIONS
*A soft case that makes
transport easy is also
included.
BD12DD
Low Frequency Capture Device
Low Frequency Capture Device
"SUBKICK"
SKRM100
Summary of Contents for Al Foster Signature Hipgig Sr.
Page 1: ......
