Yamaha AF115S Owner'S Manual Download

Page: 20 / 80

INSTRUMENT AND CONTROL FUNCTIONS

4-1

EAUU0061

Main switch

The main switch controls the ignition
and lighting systems. The various main
switch positions are described below.

TIP

The main switch is equipped with a
keyhole cover. (See page 4-2.)

EAU37441

All electrical circuits are supplied with
power, and the engine can be started.
The key cannot be removed.

TIP

The headlight, auxiliary lights, meter
lighting and taillight come on automati-
cally when the engine is started.

EAU10661

OFF

All electrical systems are off. The key
can be removed.

EWA10061

WARNING

Never turn the key to “OFF” or
“LOCK” while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.

EAU10701

LOCK

The steering is locked, and all electrical
systems are off. The key can be re-
moved.

To lock the steering

1. Turn the handlebars all the way to

the left.

2. Push the key in from the “OFF” po-

sition, release it, and then turn it to
“LOCK”.

3. Remove the key.

ZAUU0748

ZAUU0013

EAU1044P

20BF8199E2.book Page 1 Monday, February 28, 2011 10:46 AM

Summary of Contents for AF115S

















































































Search results

Summary of Contents for AF115S

Reviews:

Related manuals for AF115S

Brands by name

Popular brands

Yamaha AF115S, Owner'S Manual

Search results

Summary of Contents for AF115S

Reviews:

Related manuals for AF115S

Brands by name

Popular brands