manualshive.com logo in svg

Yamaha A4000, Owner'S Manual

Share
Download
Yamaha A4000 Owner'S Manual Download Page 176

DISK-IMPORT

176

Chapter 7  DISK Mode 

• A5000/A4000

 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 

Knob 4

[

Turn] File/Directory

Selects a file or directory from the list on the right side of
the display which contains the data to be imported.

[Range] All files and directories in the current directory.

[

Press] DOWN/IMPORT

When a directory is selected the function is “DOWN,”
opening the selected directory. The name of the newly
opened directory will appear on the left side of the display
under the disk name, and the files and directories it con-
tains will be listed on the right side of the display.
When a file is selected the function is “IMPORT,” and a
confirmation display will appear when the knob is
pressed. To actually import the selected file press Knob 5
(>YES).

Knob 5

[

Turn] View

Specifies what type of files and directories contained in
the currently open directory are to be listed on the right
side of the display.

[Range] ALL, SMP BANK, SAMPLE, SEQUENCE

• ALL ... All importable files and directories.

• SMP BANK ... Only files which will be imported as

sample banks.

• SAMPLE ... Only files which will be imported as

samples.

• SEQUENCE ... Only files which will be imported as

sequences.

[

Press] VIEW

The View parameter settings change in sequence each
time the knob is pressed.

Summary of Contents for A4000









































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands