Yamaha A4000, Owner'S Manual

Page: 140 / 296

EDIT-EG
140
Chapter 5 EDIT Mode
• A5000/A4000
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Knob 2
[ Turn] FEG Rate Scaling
This setting determines how the FEG rates (FEG attack,
FEG decay, and FEG release rates) vary according to
keyboard location (pitch) of the played note.
Set the value to 0 to keep rates the same for all keyboard
notes. Positive settings cause rates to increase as you
move up the keyboard, while negative settings cause
rates to decrease as you move up the keyboard.
[Range] -7 — +7
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 3
[ Turn] FEG Rate Velocity Sensitivity
This value sets the velocity sensitivity of the FEG rates:
the amount by which the FEG rates (FEG attack, FEG
decay, and FEG release rates) vary in response to the
velocity (force) of the played note.
Set the value to 0 to keep rates the same for all velocities.
Positive settings cause rates to increase as velocity
increases, while negative settings cause rates to
decrease as velocity increases.
[Range] -63 — +63
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 4
[ Turn] FEG Attack Level Velocity Sensitivity
This parameter sets the first velocity-sensitivity value for
the FEG’s initial level and attack level. The value operates
together with the value set by Knob 5 to determine the
amount by which these levels vary in response to the
velocity of the played note.
Positive settings cause levels to increase as velocity
increases, while negative settings cause levels to
decrease as velocity increases.
[Range] -63 — +63
[ Press] QUICK...
Calls the quick entry menu (page 83).
Knob 5
[ Turn] FEG Level Velocity Sensitivity
This parameter sets the general velocity sensitivity for all
FEG levels (FEG initial, FEG attack, FEG sustain, and
FEG release). Positive settings cause levels to increase
as velocity increases, while negative settings cause lev-
els to decrease as velocity increases.
[Range] -63 — +63
[ Press] QUICK...
Calls the quick entry menu (page 83).
Pitch EG
[EDIT] Button
→
[F4] Button
→
Knob 1 to select
"EDIT-PitchEG"
Use this page to set up the sample’s PEG (pitch envelope gen-
erator). The PEG determines how the pitch varies over time as
each note plays out.
Knob 1
[ Turn] Cursor Position/Page Selection
Positions the cursor and selects display pages.
[ Press] Tree View
Calls the Tree View display (page 83).
Knob 3
[ Turn] PEG Attack Rate
This value sets the rate at which the pitch moves from its
initial level (at Note On) to the attack level. Higher values
produce faster rates.
[Range] 0 — 127
[ Press] QUICK...
Calls the quick entry menu (page 83).
Cursor
q
(Pitch EG Rate)
Note On
Pitch (high)
Pitch (low)
Initial Level
Attack Rate Decay Rate Release Rate
Time
Attack Level
Release Level
Sustain Level
Basic Pitch
Note Off
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor/Page —
PEG Attack
Rate
PEG Decay
Rate
PEG Release
Rate
Press
action
Tree View — QUICK... QUICK... QUICK...
q
Cursor