Yamaha 585, Owner'S Manual

Page: 15 / 126

15
CLP-585/575/545/535/565GP Owner’s Manual
Getting Started — Playing the Clavinova as a Piano
Lift the cover slightly, then
push and slide it to the end
completely so that both the
panel buttons at the left side
and keyboard are visible. In
this condition, you can make
various panel operations such
as Voice selection and Song
recording/ playback as well as
play the keyboard.
3.
Press the [
P
] (Standby/On) switch at the right end of the
front panel to turn the power on.
The display located at the left end of the front panel and the power indicator
located below the left end of the keyboard both light up.
4.
Use the [MASTER VOLUME] slider at the right end of the
front panel to adjust the volume.
While playing the keyboard, adjust the volume level. For details, refer to
“Setting the volume — [MASTER VOLUME]” on page 19.
5.
After you use the instrument, press the [
P
] (Standby/On)
switch for a second to turn the power off.
The display and the power indicator are turned off.
5 8 5 575 545 535 565GP
Be caref u l to avoid catching yo u r fingers
w hen opening or closing the cover.
CAUTION
Tunin g
Unlike an acoustic piano, this
instrument does not need to be
tuned by an expert (although
the pitch can be user-adjusted
to match other instruments).
This is because the pitch of
digital instruments is always
maintained perfectly.
[ P ] (Standby/On) s w itch
The po w er indicator
lights u p.
CAUTION
Even w hen the instr u ment is
t u rned off, electricity is still
flo w ing to the instr u ment at the
minim u m level. When yo u are
not u sing the instr u ment for a
long time or d u ring electrical
storms, make s u re yo u u npl u g
the AC po w er pl u g from the w all
AC o u tlet.
NOTICE
• Any recorded Songs w hich
are not saved w ill be lost if the
po w er a u tomatically t u rns off.
Make s u re to save yo u r data
before this happens.
• Depending on the instr u ment
stat u s, the po w er may not
t u rn off a u tomatically, even
after the specified period of
time elapses. Al
w ays t u rn off
the po w er man u ally w hen the
instr u ment is not in u se.
Auto Power Off function
To prevent unnecessary power consumption, this instrument features an
Auto Power Off function that automatically turns the power off if the
instrument is not operated for a specified period of time. The amount of
time that elapses before the power is automatically turned off is
approximately 30 minutes by default; however, you can change the setting
(page 93).