![Yamaha 503 Owner'S Manual Download Page 112](http://html.mh-extra.com/html/yamaha/503/503_owners-manual_896990112.webp)
112
CVP-509/505/503/501 Owner’s Manual
3
CVP-509/505:
K
e
yboard Stand Assemb
ly
3
Attach B and C to A.
1
Align parts B and A so that the protrusion fits into the hole.
2
Fix the bottom surface of the unit using two long screws.
3
Fix the side of the speaker box using two short screws.
If the screw holes do not align, loosen the other screws and adjust
the position of B.
4
Fix C in the same way.
4
Fix E to D using two short screws.
5
Attach D to A.
1
Fix D to the bottom surface of A using two short screws.
If the screw holes do not align, loosen the other screws and adjust
the position of D.
6
Raise A to the standing position.
Use the front legs as support to raise A.
7
Install F.
B
B
A
A
B
Attach the parts, pressing B onto A so that
the two fit tightly together.
A
B
Tighten the screws after
attaching the washers to
the short screws.
D
D
E
E
CAUTION
• Be careful not to pinch your fingers.
• When you raise the unit, do not hold the key cover.
D
D
A
2
Fix the side of the
speaker box using two
short screws.
A
A
A
A
D
D
1
Remove the plastic
cover from D.
F
F
2
Untie and straighten out the
bundled cord attached to
the bottom of F.
D
D
F
F
3
Pass the pedal cord from
under D to the backside of A.
4
Attach F.
Use three thin screws.