–5–
E
ENGINE OIL REPLACEMENT
INSP
ADJ
NOTE:
PERIODIC INSPECTION AND
ADJUSTMENT
ENGINE
ENGINE OIL REPLACEMENT
1. Start the engine and let it warm up for several
minutes.
2. Stop the engine and place an oil pan under
the drain bolt.
3. Remove:
S
Oil filler cap
1
4. Remove:
S
Drain bolt
1
(with gasket)
Drain the crankcase of its oil.
5. If the oil filter is to be replaced during this oil
change, remove the following parts and rein-
stall them.
Replacement steps:
F
Remove the oil filter
1
using the oil filter
wrench
2
.
Oil filter wrench:
YU-38411, 90890-01426
F
Apply engine oil to the O-ring
3
of the new oil
filter.
Make sure the O-ring
3
is positioned correctly.
F
Tighten the oil filter using the oil filter wrench.
Oil filter:
18 Nm (1.8 m
S
kg, 13 ft
S
lb)
