Yamaha 330 Owner'S Manual Download

Page: 15 / 108

Before Using the Clavinova

CLP-370/340/330, CLP-S308/S306

Owner’s Manual

ENGLISH

Setting the Volume

Initially set the

[MASTER VOLUME]

slider about halfway between the “MIN” and “MAX” settings. Then, when you

start playing, re-adjust the

[MASTER VOLUME]

slider to the most comfortable listening level.

CAUTION

Do not use the Clavinova at a high volume level for a long period of time; doing so may damage your hearing.

Using Headphones

Connect a pair of headphones to one of the

[PHONES]

jacks.

Two

[PHONES]

jacks are provided.

You can connect two sets of standard stereo head-
phones. (If you are using only one pair of headphones,
you can plug them into either jack.)

Using the Headphone Hanger

A headphone hanger is included in the Clavinova pack-
age so that you can conveniently hang the headphones
on the Clavinova. Install the headphone hanger using
included two screws (4 x 10mm) as shown in the figure.

CAUTION

Do not hang anything other than the headphones on
the hanger. Doing so may damage the Clavinova or the
hanger.

Using the Speaker Switch

This switch turns the internal speakers on or off.

NORMAL (HP. SW)

......... The speakers produce sound as long as a pair of

headphones is not connected.

....................................... The speakers always produce sound.

OFF

...................................... The speakers produce no sound.

TERMINOLOGY

MASTER VOLUME:

The volume level of the entire keyboard sound.

NOTE

You can also adjust the

[PHONES]

output level and the AUX OUT level using the

[MASTER VOLUME]

slider.

The level decreases.

The level increases.

PHONES

SPEAKER

NORMAL

OFF

HP. SW

standard
stereo
phone plug

bottom surface

PHONES

SPEAKER

NORMAL

OFF

HP. SW

Summary of Contents for 330













































































































Search results

Summary of Contents for 330

Reviews:

Related manuals for 330

Brands by name

Popular brands

Yamaha 330, Owner'S Manual

Search results

Summary of Contents for 330

Reviews:

Related manuals for 330

Brands by name

Popular brands