Control function operation
30
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including in-
terference that may cause undesired opera-
tion.
NOTICE
ECJ00030
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authori-
ty to operate the remote control transmit-
ter.
EJU31384
Yamaha Security System
The Yamaha Security System functions to
help prevent unauthorized use or theft of the
watercraft. The lock and unlock modes of the
security system can be selected by operating
the remote control transmitter that is included
with this watercraft. The engine cannot be
started if the lock mode of the security system
is selected. The engine can only be started if
the unlock mode is selected. (See page 29 for
information on the remote control transmitter.)
TIP:
The Yamaha Security System settings can
only be selected while the engine is stopped.
EJU37412
Yamaha Security System settings
The Yamaha Security System settings will be
confirmed by the number of beeps when the
remote control transmitter is operated, and by
the “UNLOCK” indicator light of the dual ana-
log meter unit. (See page 39 for information
on the dual analog meter unit.)
TIP:
●
The beeper sounds two times for the nor-
mal operation mode or three times for the
Low RPM Mode. (See page 37 for Low
RPM Mode activation procedures.)
●
If the remote control transmitter is operated
while the dual analog meter unit is in the
standby state, the unit will perform the initial
operation, and then the setting is selected.
To select the lock mode:
Push the lock button on the remote control
transmitter briefly. The beeper sounds once
and the “UNLOCK” indicator light blinks once,
then goes off. This indicates the lock mode is
selected.
To select the unlock mode:
Push the “L-Mode” (unlock) button on the re-
mote control transmitter briefly. The beeper
sounds two or three times and the “UNLOCK”
indicator light blinks two or three times, then
Number of
beeps
Yamaha Security
System mode
“UN-
LOCK” in-
dicator
light
Lock
Goes off
Unlock
(normal operation
mode)
Comes
on
Unlock
(Low RPM Mode)
Comes
on
1
Lock button
2
“UNLOCK” indicator light
1
2
UF2R12E0.book Page 30 Tuesday, July 6, 2010 9:21 AM
