Yamaha 2011 V Star XVS650A Owner'S Manual Download

Page: 42 / 94

OPERATION AND IMPORTANT RIDING POINTS

6-4

1000–1600 km (600–1000 mi)

Avoid prolonged operation above 1/2
throttle.

1600 km (1000 mi) and beyond

The vehicle can now be operated nor-
mally.

NOTICE

ECA10270

If any engine trouble should occur
during the engine break-in period,
immediately have a Yamaha dealer
check the vehicle.

EAU17171

Parking

When parking, stop the engine, remove
the key from the main switch, and then
turn the fuel cock lever to “OFF”.

WARNING

EWA10311

●

Since the engine and exhaust
system can become very hot,
park in a place where pedestri-
ans or children are not likely to
touch them and be burned.

●

Do not park on a slope or on soft
ground, otherwise the vehicle
may overturn, increasing the
risk of a fuel leak and fire.

●

Do not park near grass or other
flammable materials which
might catch fire.

U1BF21E0.book Page 4 Tuesday, April 20, 2010 11:41 AM

Summary of Contents for 2011 V Star XVS650A































































































Search results

Summary of Contents for 2011 V Star XVS650A

Reviews:

Related manuals for 2011 V Star XVS650A

Brands by name

Popular brands

Yamaha 2011 V Star XVS650A, Owner'S Manual

Search results

Summary of Contents for 2011 V Star XVS650A

Reviews:

Related manuals for 2011 V Star XVS650A

Brands by name

Popular brands