Yamaha 2008 YZF-R6X Owner'S Manual Download Page 37 | Manualshive

Page: 37 / 110

background image

INSTRUMENT AND CONTROL FUNCTIONS

3-21

3

EAU38942

Adjusting the front fork

This front fork is equipped with spring
preload adjusting bolts, rebound damp-
ing force adjusting screws, compres-
sion damping force adjusting bolts (for
fast compression damping) and com-
pression damping force adjusting bolts
(for slow compression damping).

WARNING

EWA10180

Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.

Spring preload

To increase the spring preload and
thereby harden the suspension, turn
the adjusting bolt on each fork leg in di-
rection (a). To decrease the spring pre-
load and thereby soften the
suspension, turn the adjusting bolt on
each fork leg in direction (b).

NOTE:

Align the appropriate groove on the ad-
justing mechanism with the top of the
front fork collar.

Rebound damping force

To increase the rebound damping force
and thereby harden the rebound damp-
ing, turn the adjusting screw on each
fork leg in direction (a). To decrease the
rebound damping force and thereby
soften the rebound damping, turn the
adjusting screw on each fork leg in di-
rection (b).

1. Spring preload adjusting bolt

1. Current setting

2. Front fork collar

Spring preload setting:

Minimum (soft):

0

Standard:

2

Maximum (hard):

5

1. Rebound damping force adjusting screw

U13S20E0.book Page 21 Thursday, September 13, 2007 2:14 PM

«
...
35
36
37
38
39
...
»

Summary of Contents for 2008 YZF-R6X















































































































Reviews:

No comments

Related manuals for 2008 YZF-R6X

Brand: Caberg Pages: 16

Brand: ICON Pages: 8

Brand: Yamaha Pages: 102

Brand: MRA Pages: 9

Grizzly Minicross RCX/12 50CC

Brand: Malaguti Pages: 33

Brand: Corbin Pages: 4

Brand: Fantic Pages: 153

Brand: UBCO Pages: 27

SHERCO 50 SE 2022

Brand: SHERCO Pages: 226

Brand: National Cycle Pages: 2

Brand: DYNATEK Pages: 4

Brand: DYNATEK Pages: 4

Brand: Malaguti Pages: 272

Brand: Wunderlich Pages: 2

Brand: APRILIA Pages: 216

Brand: Taurus Pages: 48

Brand: RIEJU Pages: 34

Brand: Baotian Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands