Yamaha 2008 YZF-R1X Owner'S Manual Download

Page: 35 / 108

INSTRUMENT AND CONTROL FUNCTIONS

3-19

Passenger seat

To remove the passenger seat

1. Insert the key into the seat lock,

and then turn it clockwise.

2. Lift the front of the passenger seat

and pull it forward.

To install the passenger seat

1. Insert the projection on the rear of

the passenger seat into the seat
holder as shown, and then push
the front of the seat down to lock it
in place.

2. Remove the key.

NOTE:

Make sure that the seats are properly
secured before riding.

EAU33870

Helmet holders

The helmet holders are located on the
bottom of the passenger seat.

To secure a helmet to a helmet hold-
er

1. Remove the passenger seat. (See

page 3-18.)

2. Attach the helmet to a helmet hold-

er, and then securely install the
passenger seat.

WARNING

EWA11040

Never ride with a helmet attached to
a helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.

1. Projection
2. Seat holder

1. Passenger seat lock
2. Unlock.

1. Projection
2. Seat holder

1. Helmet holder

U4C821E0.book Page 19 Tuesday, July 17, 2007 11:37 AM

Summary of Contents for 2008 YZF-R1X













































































































Search results

Summary of Contents for 2008 YZF-R1X

Reviews:

Related manuals for 2008 YZF-R1X

Brands by name

Popular brands

Yamaha 2008 YZF-R1X, Owner'S Manual

Search results

Summary of Contents for 2008 YZF-R1X

Reviews:

Related manuals for 2008 YZF-R1X

Brands by name

Popular brands