Safety information
17
watch the skier’s hand signals and condi-
tion.
FX High Output
FX Cruiser High Output
●
Your control while pulling a water-skier is
affected by the skier’s ability, as well as wa-
ter and weather conditions.
●
When preparing to pull a skier, operate the
watercraft at the slowest possible speed
until the watercraft is well away from the ski-
er and slack in the ski rope is taken up.
Make sure that the rope is not looped
around anything.
After checking that the skier is ready and
that there is no traffic or other obstacles, ap-
ply enough throttle to raise the skier.
●
Make smooth, wide turns. The watercraft is
capable of very sharp turns, which could ex-
ceed the abilities of the skier. Keep the skier
at least 50 m (150 ft), about twice the dis-
tance of a standard ski rope, from any po-
tential hazard.
●
Be alert to the hazard of the ski rope handle
snapping back at the watercraft when the
skier falls or is unable to get up on the skis.
●
Towing heavy or bulky objects other than
skiers, such as another boat or watercraft,
can cause loss of steering control and cre-
ate a hazardous condition. If you must tow
another boat in an emergency situation, op-
erate slowly and cautiously.
1
Handgrip
1
Handgrip
1
Handgrip
UF1X12E0.book Page 17 Thursday, June 14, 2007 10:24 AM
Summary of Contents for 2008 WaveRunner FX Cruiser High Output
