Yamaha 2004 XVS1100AS Page 67 Owner'S Manual Download | Manualshive

Page: 67 / 94

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-21

6

EAU22270

Adjusting the rear brake light
switch

The rear brake light switch, which is ac-
tivated by the brake pedal, is properly
adjusted when the brake light comes
on just before braking takes effect. If
necessary, adjust the brake light switch
as follows.
Turn the adjusting nut while holding the
rear brake light switch in place. To
make the brake light come on earlier,
turn the adjusting nut in direction (a). To
make the brake light come on later, turn
the adjusting nut in direction (b).

EAU22321

Checking the front and rear
brake pads

Front brake

Rear brake

The front and rear brake pads must be
checked for wear at the intervals spec-
ified in the periodic maintenance and
lubrication chart. Each brake pad is
provided with a wear indicator groove,
which allows you to check the brake
pad wear without having to disassem-
ble the brake. To check the brake pad
wear, check the wear indicator
grooves. If a brake pad has worn to the
point that the wear indicator groove has
almost disappeared, have a Yamaha
dealer replace the brake pads as a set.

1. Rear brake light switch

2. Rear brake light switch adjusting nut

1. Brake pad wear indicator groove

1. Brake pad wear indicator groove

5YS20.book Page 21 Thursday, June 19, 2003 1:41 PM

«
...
65
66
67
68
69
...
»

Summary of Contents for 2004 XVS1100AS































































































Reviews:

No comments

Related manuals for 2004 XVS1100AS

Brand: N-Com Pages: 2

Brand: N-Com Pages: 64

Brand: Yamaha Pages: 287

Brand: hepco & becker Pages: 6

Brand: HYOSUNG Pages: 199

Brand: Suzuki Pages: 199

Brand: Apollo Pages: 92

Tear-off machine

Brand: Allstar Pages: 4

Brand: Caberg Pages: 16

Brand: R&G Pages: 4

Brand: Yamaha Pages: 248

Brand: Yamaha Pages: 86

BLITZ 9-13 Visor

Brand: Fubag Pages: 17

Brand: MINIMOTO Pages: 20

Brand: SILENCE Pages: 68

Brand: Oxford Pages: 40

HotGrips OF690 Adventure

Brand: Oxford Pages: 42

Brand: Petzl Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands