Yamaha 2004 XVS1100AS Page 61 Owner'S Manual Download

Page: 61 / 94

PERIODIC MAINTENANCE AND MINOR REPAIR

6-15

very carefully and replace it as
soon as possible with a high-
quality product.

Tire information

This motorcycle is equipped with spoke
wheels and tube tires.

WARNING

EWA10460

●

The front and rear tires should
be of the same make and de-
sign, otherwise the handling
characteristics of the vehicle
cannot be guaranteed.

●

After extensive tests, only the
tires listed below have been ap-
proved for this model by
Yamaha Motor Co., Ltd.

EAU32652

Tires (XVS1100A)

To maximize the performance, durabil-
ity, and safe operation of your motor-
cycle, note the following points
regarding the specified tires.

Tire air pressure

The tire air pressure should be checked
and, if necessary, adjusted before each
ride.

WARNING

EWA10500

●

The tire air pressure must be
checked and adjusted on cold
tires (i.e., when the temperature
of the tires equals the ambient
temperature).

●

The tire air pressure must be ad-
justed in accordance with the
riding speed and with the total
weight of rider, passenger, car-
go, and accessories approved
for this model.

Front tire:

Size:

110/90-18M/C 61S

Manufacturer/model:

DUNLOP/K555F
BRIDGESTONE/EXEDRA L309

Rear tire:

Size:

170/80-15M/C 77S

Manufacturer/model:

DUNLOP/K555
BRIDGESTONE/EXEDRA G546G

5YS20.book Page 15 Thursday, June 19, 2003 1:41 PM

Summary of Contents for 2004 XVS1100AS































































































Search results

Summary of Contents for 2004 XVS1100AS

Reviews:

Related manuals for 2004 XVS1100AS

Brands by name

Popular brands

Yamaha 2004 XVS1100AS, Owner'S Manual

Search results

Summary of Contents for 2004 XVS1100AS

Reviews:

Related manuals for 2004 XVS1100AS

Brands by name

Popular brands