Yamaha 2003 YZ450F, Owner'S Service Manual

Page: 452 / 644

5 - 6
CHAS
FRONT WHEEL AND REAR WHEEL
5. Install:
●
Wheel axle 1
NOTE:
Apply the lithium soap base grease on the
wheel axle.
6. Install:
●
Nut (wheel axle) 1
T
R .
.
105 Nm (10.5 m · kg, 75 ft · lb)
7. Tighten:
●
Bolt (axle holder) 1
NOTE:
Before tightening the bolt, fit the wheel axle to
the axle holder by stroking the front fork sev-
eral times with the front brake applied.
8. Install:
●
Brake hose 1
To brake hose holder 2 .
NOTE:
Before tightening the bolt (brake hose holder),
align the top
a
of the brake hose neck with the
brake hose holder bottom
b
. Then pass the
brake hose in front of the axle boss
c
and fit it
into the hose groove
d
so that the brake hose
does not contact the nut (wheel axle).
T
R
.
.
23 Nm (2.3 m · kg, 17 ft · lb)
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)