3 - 24
INSP
ADJ
FRONT FORK INSPECTION/
FRONT FORK OIL SEAL AND DUST SEAL CLEANING
3. Adjust:
●
Drive chain slack
Drive chain slack adjustment steps:
●
Loosen the axle nut
1
and locknuts
2
.
●
Adjust chain slack by turning the adjusters
3
.
To tighten
→
Turn adjuster
3
clockwise.
To loosen
→
Turn adjuster
3
counter-
clockwise and push wheel forward.
●
Turn each adjuster exactly the same
amount to maintain correct axle alignment.
(There are marks
a
on each side of chain
puller alignment.)
NOTE:
Turn the adjuster so that the chain is in line
with the sprocket, as viewed from the rear.
CAUTION:
Too small chain slack will overload the
engine and other vital parts; keep the
slack within the specified limits.
●
Tighten the axle nut while pushing down
the drive chain.
T
R
.
.
Axle nut:
110 Nm (11.0 m • kg, 80 ft • lb)
●
Tighten the locknuts.
5PA30560
EC36C000
FRONT FORK INSPECTION
1. Inspect:
●
Front fork smooth action
Operate the front brake and stroke the front
fork.
Unsmooth action/oil leakage
→
Repair or
replace.
5PA30570
EC36D001
FRONT FORK OIL SEAL AND DUST SEAL
CLEANING
1. Remove:
●
Protector
1
●
Dust seal
2
NOTE:
Use a thin screw driver, and be careful not to
damage the inner fork tube and dust seal.
5PA30580
