Yamaha 2002 SuperJet 700 Owner'S/Operator'S Manual Download | Manualshive

Page: 80 / 112

background image

4-7

E

EJU01170

Maintenance and

adjustments

Periodic inspection, adjustment and lubri-

cation will keep your watercraft in the safest
and most efficient condition possible. Safety
is an obligation of the watercraft owner. The
most important points of watercraft inspec-
tion, adjustment and lubrication are
explained on the following pages.

See your Yamaha dealer for genuine

Yamaha replacement parts and optional
accessories designed for your watercraft.

Remember that failures that are the result

of the installation of parts or accessories
which are not qualitatively equivalent to gen-
uine Yamaha parts are not covered by the
limited warranty.

WARNING

@

●

Be sure to turn off the engine when
you perform maintenance unless oth-
erwise specified, otherwise an acci-
dent or injury could result from
unexpected operation, moving parts,
or electric shock. If the owner is not
familiar with watercraft servicing, this
work should be done by a Yamaha
dealer. Improperly serviced compo-
nents could fail or stop operating cor-
rectly, which could result in an
accident.

●

Modifications to this watercraft not
approved by Yamaha may cause loss
of performance or excessive noise, or
render it unsafe for use. Consult a
Yamaha dealer before attempting any
changes.

@

UF1N10.book Page 7 Wednesday, July 18, 2001 3:38 PM

«
...
78
79
80
81
82
...
»

Summary of Contents for 2002 SuperJet 700

















































































































Reviews:

No comments

Related manuals for 2002 SuperJet 700

Brand: Lagoon Pages: 114

Brand: Oru Kayak Pages: 21

2009 Signature 250

Brand: Chaparral Pages: 148

Brand: Walker Bay Pages: 13

Brand: Klepper Pages: 5

Brand: NRS Pages: 8

Dufour 450 Perse

Brand: Phoenix Pages: 13

Alice Bavaria Cruiser 51 2016

Brand: Hermes Yachting Pages: 25

Brand: PROAQUA Pages: 24

Brand: Prestige Pages: 116

Brand: CORRECT CRAFT Pages: 188

Brand: CORRECT CRAFT Pages: 192

Brand: Gumotex Pages: 40

Brand: Gumotex Pages: 36

Brand: Gumotex Pages: 44

Brand: Galaxy Pages: 24

Brand: Ballistic Pages: 22

Grand Soleil 40

Brand: Cantiere Del Pardo Pages: 97

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands