Yamaha 2001 YZF-R6N, Owner'S Manual

Page: 34 / 124

INSTRUMENT AND CONTROL FUNCTIONS
3-13
3
Passenger seat
To remove the passenger seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
2. While holding the key in that posi-
tion, lift the front of the passenger
seat and pull it forward.
To install the passenger seat
1. Insert the projection on the rear of
the passenger seat into the seat
holder as shown, and then push
the front of the seat down to lock it
in place.
2. Remove the key.
NOTE:
@
Make sure that the seats are properly
secured before riding.
@
EAU03159
Helmet holders
The helmet holders are located on the
bottom of the passenger seat.
To secure a helmet to a helmet
holder
1. Remove the passenger seat. (See
page 3-12 for removal and instal-
lation procedures.)
2. Attach the helmet to a helmet
holder, and then securely install
the passenger seat.
1. Passenger seat lock
2. Unlock.
Left side
1. Projection
2. Seat holder 1. Helmet holder (
×
2)
E_5mt.book Page 13 Thursday, October 5, 2000 3:24 PM