–7–
O Fasten the main harness, ground lead and battery
box with a plastic clamp.
P The end of the clamp is facing upward.
Q The end of the clamp is facing upward.
R Licence and flasher light sub harness on the
taillight unit.
S Licence and flasher light sub harness on the
taillight unit.
T Clamp the leads.
U Store the ends of all leads at the inside of the rib.
V Fasten the licence light lead. And bend the licence
light lead.
W Fasten the flasher light lead. And bend the flasher
light lead.
CABLE ROUTING
SPEC
H Route the seat lock cable into the hole of the frame.
Mount the cable so that the side covered with a
cable protector up the end is positioned at rear.
I Fasten the seat lock cable with a steel clamp.
J Do not fasten the seat lock cable.
K Route the wire negative lead under the starter relay
lead.
L Fasten the main harness, starter relay lead and
wire negative lead with a plastic clamp.
M Route the wire negative lead under the main
harness.
N Position the wire negative lead coupler under the
main harness.
