manualshive.com logo in svg

Yamaha 01V, Owner'S Manual

Share
Download
Yamaha 01V Owner'S Manual Download Page 47

Title Edit Dialog Box

37

01V—Owner’s Manual

Title Edit Dialog Box

The Title Edit dialog box is used to title mix scenes, EQ programs, dynamics programs, 
and effects programs. Program titles can be up to 12 characters, scene memory titles up 
to 8 characters.

1. Use the cursor buttons to position the cursor in the title window.

2. Use the PARAMETER wheel to select characters.

3. Use the cursor buttons to select the following switches, and press the 

[ENTER] button to execute their functions.

INS

—Insert a space at the cursor position and moves subsequent characters to the 

right. Characters moved beyond the right edge of the title window are lost.

DEL

—Delete the character at the cursor position and move subsequent characters to 

the left.

4. Use the [+1/INC] button to enter a space at the cursor position.

5. Use the [–1/DEC] button 

to t

oggle the character at the cursor position 

between uppercase, lowercase, and numerals.

6. Press the [ENTER] button to store.

Summary of Contents for 01V




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands