
Effects Parameters
157
01V—Owner’s Manual
FREEZE (Effect 2 only)
Basic Sampler with 2.9 second memory.
To record and playback a sample
1. Send a channel signal to Effect 2, and then recall the Freeze effect.
See “Using the Effects” on page 123 and “Recalling Effects Programs” on page 134.
2. Use the [EFFECT 2] button to locate EFFECT 2 page 1, as shown below.
3. Select the
(REC) switch, and then press the [ENTER] button. Note
that the previous sampler is deleted at this point.
The REC switch appears highlighted, and input signal can be heard.
1. 0.0–2972.1 ms (fs=44.1 kHz), 0.0 ms–2730.6 ms (fs=48 kHz)
Parameter
Range
Description
REC MODE MANUAL, INPUT
In MANUAL mode, recording is started by pressing
the [ENTER] button. In INPUT mode, recording is
triggered by an input signal.
START
*1
Playback start point in milliseconds
[SAMPLE]
0–131070
Playback start point in samples
PLY MODE
MOMENT, CONTI.,
INPUT
In MOMENT mode, the sample plays for the moment
that the [ENTER] button is pressed. In CONT. mode,
playback continues once the [ENTER] button has
been pressed. In INPUT mode, playback continues
once it’s been triggered by an input signal. The
number of times the sample plays is set using the
LOOP NUM parameter.
END
*1
Playback end point in milliseconds
[SAMPLE]
0–131070
Playback end point in samples
LOOP
NUM
0–100
Number of times the sample plays
LOOP
*1
Loop start point in milliseconds
[SAMPLE]
0–131070
Loop start point in samples
TRG LVL
–60 to 0 dB
Input trigger level (i.e., the signal level required to
trigger recording or playback)
TRG DLY
–1000 to +1000 ms
Recording delay. For plus values, recording starts after
the trigger is received. For minus values, recording
starts before the trigger is received.
TRG MASK
0–1000 ms
Once playback has been triggered, subsequent
triggers are ignored for the duration of the TRG MASK
time.
MIDI TRG
OFF, C1–C6, ALL
Sample playback can be triggered using MIDI Note
on/off messages.
PITCH
–12 to +12 semitones
Playback pitch shift
FINE
–50 to +50 cents
Playback pitch shift fine
Summary of Contents for 01V
