manualshive.com logo in svg

Yamaha 007POTO-G0, Owner'S Manual

Share
Download
Yamaha 007POTO-G0 Owner'S Manual Download Page 52

52

Setup required when starting up

LS9-16/32  Owner’s Manual

4

In the STEREO MASTER section of the top 
panel, make sure that the STEREO channel 
[ON] key is on, and raise the STEREO chan-
nel fader to 0 dB.

5

Make sure that the ST button for each chan-
nel in the window is on (white characters on 
a pink background).

The ST button is an on/off switch for the signal sent 
from each channel to the STEREO bus. This is the 
same function as the ST button in the SELECTED CH 
VIEW screen.

6

To adjust the pan (INPUT channel) or bal-
ance (ST IN channel) of the signal sent from 
the input channel to the STEREO bus, move 
the cursor to the PAN/BAL knob of the 
desired channel in the window, and operate 
the dial or the [DEC]/[INC] keys.

7

In the channel module section or the ST IN 
section, make sure that the [ON] key of the 
channel you want to operate is turned on.

8

Raise the fader/encoder of each channel to 
obtain an appropriate volume.

9

If you want to operate a channel that is not 
currently shown in the popup window, use 
the [SEL] key to select that channel, and 
then make settings for it.

For example if INPUT channels 1–8 are shown in the 
popup window, pressing the INPUT channel 9 [SEL] 
key will change the popup window to INPUT channels 
9–16. If you press a [SEL] key of the ST IN section, 
the L/R channels of ST IN channels 1–4 will be dis-
played together.

• If you’ve turned on POPUP APPEARS WHEN PRESSING 

KNOBS in the PREFERENCE popup window (

→

 p. 194), you 

can also access this popup window by pressing the 
SELECTED CHANNEL section [PAN] encoder.

HINT

Summary of Contents for 007POTO-G0



































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands