manualshive.com logo in svg

Yamaha 007POTO-G0, Owner'S Manual

Share
Download
Yamaha 007POTO-G0 Owner'S Manual Download Page 203

203

Using USB memory to save/load data

19

User settings (Secur

ity)

LS9-16/32  Owner’s Manual

●

Copying/pasting a file

Here’s how to copy a desired file into buffer memory, and 
then paste it with a different file name.

1

In the DISPLAY ACCESS section, press the 
[SETUP] key repeatedly to access the USER 
SETUP screen.

2

Move the cursor to the SAVE/LOAD button, 
and press the [ENTER] key to access the 
SAVE/LOAD popup window.

3

Move the cursor to the file list, use the 
panel dial to select the file that you want to 
copy, move the cursor to the COPY button, 
and press the [ENTER] key.

The highlighted line in the file list indicates the file 
that is selected for operations.

4

If you want to move to a different directory, 
move the cursor to the icon of the column 
of the desired directory, and press the 
[ENTER] key.

To move to the next higher level, move the cursor to 
the arrow button in the PATH field and press the 
[ENTER] key.

5

Move the cursor to the PASTE button and 
press the [ENTER] key.

A keyboard window will appear, allowing you to enter 
the paste-destination file name.
For details on entering text, refer to “Assigning a 
name” (

→

 p. 34).

6

Enter the paste-destination file name, move 
the cursor to the PASTE button, and press 
the [ENTER] key.

If you specified an existing file name, a confirmation 
message will appear.

●

Deleting a file

1

In the DISPLAY ACCESS section, press the 
[SETUP] key repeatedly to access the USER 
SETUP screen.

2

Move the cursor to the SAVE/LOAD button, 
and press the [ENTER] key to access the 
SAVE/LOAD popup window.

3

Move the cursor to the file list, use the 
panel dial to select the file that you want to 
delete, move the cursor to the DELETE but-
ton, and press the [ENTER] key.

A dialog box will ask you to confirm the Delete opera-
tion.

4

To execute the Delete operation, move the 
cursor to the OK button and press the 
[ENTER] key.

●

Creating a directory

1

In the DISPLAY ACCESS section, press the 
[SETUP] key repeatedly to access the USER 
SETUP screen.

2

Move the cursor to the SAVE/LOAD button, 
and press the [ENTER] key to access the 
SAVE/LOAD popup window.

3

If you want to move to a different directory, 
move the cursor to the icon of the column 
of the desired directory, and press the 
[ENTER] key.

To move to the next higher level, move the cursor to 
the arrow button in the PATH field and press the 
[ENTER] key.

• If you attempt to paste using the file name of an existing copy-

protected file, the Paste operation will not be executed.

NOTE

• You can’t delete a protected file.

NOTE

Summary of Contents for 007POTO-G0



































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands