Yamaha Audio CD-NT670 Owner'S Manual Download Page 45

Page: 45 / 61

More on playback

FAVORITES registration list

*1 To play back the content, you must configure the device for the input source.

*2 Available only when the pre-main amplifier (A-U670) is connected with the system.

Input

sources

Content that can

be registered

What happens when the FAVORITES buttons are

pressed

Server

Songs

The input source is switched and the registered songs
are played back from the first track.

NetRadio

Radio station

The input source is switched and the registered radio
station is played back.

AirPlay*

Input source only

The input source is switched.

Bluetooth

Input source only

The input source is switched.

USB

Songs

The input source is switched and the registered songs
is played back.

USB DAC*

Input source only

The input source is switched.

Songs

The input source is switched and the registered songs
are played back from the first track.

Radio station

The input source is switched and the registered radio
station is played back.

DAB
(CD-NT670D
only)

Station

The input source is switched and the registered radio
station is played back.

AUX*

Input source only

The input source is switched.

Digital*

Input source only

The input source is switched.

Summary of Contents for CD-NT670






























































Search results

Summary of Contents for CD-NT670

Reviews:

Related manuals for CD-NT670

Brands by name

Popular brands

Yamaha Audio CD-NT670, Owner'S Manual

Search results

Summary of Contents for CD-NT670

Reviews:

Related manuals for CD-NT670

Brands by name

Popular brands