Yamaha Audio CD-NT670 Owner'S Manual Download Page 26

Page: 26 / 61

Playing back music on USB devices

This unit allows playback USB devices which music files are recorded.
For details on playable USB devices, see “Supported devices/medias” (P.53).

Turn INPUT to select [USB] or press

on the remote control.

Connect a USB device to the USB port.

Browse and select a song.

Playback starts.

S
T

Shows other item.

ENTER/

Confirms the selected item and proceeds
to the next level or start playback.

HOME

Shows the top-level item.

Returns to the previous item.

DISPLAY

Finishes browsing and displays the
playback content information.

Play/pause

/ Moves to the next or previous song in the

folder.

Stop

SHUFFLE

Starts shuffle playback (

P.37).

REPEAT

Starts repeat playback (

P.37).

INPUT

USB

•

Some USB devices may not work properly even if
they meet the requirements. Playability of and
power supply to all USB devices are not
guaranteed.

•

Yamaha and suppliers do not accept any liability
for the loss of data saved on a USB device
connected to the unit. As a precaution, it is
recommended to make backup copies of
important files.

•

Stop playback before disconnecting the USB device.

•

A USB device is automatically charged when it is
connected to the unit, except in the eco standby
mode.

Summary of Contents for CD-NT670






























































Search results

Summary of Contents for CD-NT670

Reviews:

Related manuals for CD-NT670

Brands by name

Popular brands

Yamaha Audio CD-NT670, Owner'S Manual

Search results

Summary of Contents for CD-NT670

Reviews:

Related manuals for CD-NT670

Brands by name

Popular brands