Symptom
Cause
Corrective Measure
Check if the section pipe is not be assembled well
Using sealing tape to reassemble
The pump sucking air from exhaust pipe and hose
Using sealing pipe to reassemble
The handle not be fixed well
Re-tightened the screw
Fluid leak from pump or shaft
Seal was damaged by the not applicable liquid
Contact the nearest dealer or our office
The pump works, but does not
discharges liquid.
Product name
Drum dispenser
Gear ratio
1
:
3
Model No.
686837
Discharge volume*
10L/20 rotation
Type
RDS-3
Hose length
1.8m
Available Liquid
Gasoline, Light oil, Kerosene, Lubricant oil
-
How to operate the Machine
1
)
Insert the pump assembly into drum can or dedicated tank. Fix with bung adapter.
2
)
Turn the handle to right (clockwise direction), the solution will be discharged.
3
)
After the end of daily work, put the nozzle assembly into nozzle holder for keep.
-
Specification
* This test result of discharge volume was the condition when kerosene is 20
℃
.
Not performance guarantee value.
-
Troubleshooting and Corrective Measures
-
Optional Accessories
-
Limited Warranty
If an abnormality occurs during normal operation in accordance with the operating instructions, the defective parts
of this product will be serviced or will be replaced free of charge. However, this Warranty will not cover
compensation for incidental damage or any malfunction listed below.
1. Warranty
period
:
This warranty will be valid for a period of 12 months after the date of purchase.
2. Warranty
:
If during the warranty period, any of the material of the genuine parts of this product or the workmanship of this
product is found defective, and is so verified by our company, the servicing cost will be fully born by our company.
3. Exclusion
:
Even during the warranty period, this warranty does not cover the following:
(1) Malfunction arising from use of parts other than manufacturer-specified genuine parts.
(2) Malfunction arising from misuse or operating errors, or lack of storage or maintenance care.
(3) Malfunction arising from use with a fluid that may cause corrosion, inflation or dissolution of the component
parts of the product.
(4) Irregularity arising from repair made by other than by our firm, our regional office, dealer or authorized service
personnel.
(5) Wear and tear of parts that must be regularly replaced in the course of normal operation, such as packings,
O-rings, hoses, and cords.
(6) Malfunction and/or damage due to use of compressed air or electric power source (electric voltage).
(7) Malfunction and/or damage due to transportation, moving or drop page of product after purchase.
(8) Malfunction and/or damage due to fire, earthquake, flood or other force majeure.
(9) Malfunction arising from use of compressed air that contains impurities or excessive moisture, or use of gases
or fluids other than the specified compressed air.
(10) Malfunction arising from use with a fluid that causes excessive abrasion or use of oil other than that specified
for this product.
Furthermore, this warranty does not cover the rubber parts, or the other parts that are subject to wear in
normal operation, used in this product and its accessories.
4. Parts
:
Parts for this product will be kept available for 5 years after discontinuation of production. Once 5 years have
elapsed after close of production, availability of parts for this product cannot be guaranteed.
No.1-3, 1-Chome, Minami-magome, Ota-ku, Tokyo 143-8504 Japan
Phone: +81-(0)3-3777-0241
Fax : +81-(0)3-3777-0584
E-mail: [email protected] URL: www.yamadacorp.co.jp/global
YAMADA (THAILAND) Co., Ltd.
41/79 Moo 6, Bangna-Trad Rd., Bangchalong, Bangplee,Samutprakarn 10540 Thailand
Phone: +66-(0)2-130-0990 Fax : +66-(0)2-130-0993
E-mail: [email protected]
URL: www.yamadacorp.co.jp/global
Drip pan
(OJR-2)
686835