8
▪
Use pliers to pull out the C spool valve assembly. [Fig.6.4]
▪
Remove the sleeve from the valve body using the sleeve
remover (special tool: Part No. 713148). [Fig.6.5]
＜
NOTE
＞
▪
Be careful not to damage or crack the sliding surface
when pulling out the C spool valve assembly and sleeve.
▪
C spring removal
Insert a flathead screwdriver under the end of the C spring
and lift up on the end outward to release the C spring.
[Fig.6.6 and 6.7]
＜
NOTE
＞
▪
Once the C spring is removed, the arm will be released.
▪
With snap ring pliers, push to remove the interlocking
bushing while widening its groove. [Fig.6.8 and 6.9]
<NOTE>
▪
Do not exert excessive force on the spool.
▪
Do not widen the groove of the bushing unnecessarily.
▪
Once the interlocking bushing is removed, the spring
bearing and cushion will be removed, too.
Fig.6.4
Fig.6.6
Fig.6.5
Fig.6.8
Fig.6.9
Fig.6.7
Arm
Summary of Contents for DP-20F/P
Page 15: ......
