Yalp Sutu, Installation Instructions Manual

Page: 35 / 53

35
YA3550-210723
EN
NL
DE
EN
WARNING Product damage risk! Dropping the
crane hook plates onto the computer can result
in serious product damage. Hold the plate when
dismounting the crane hooks from the plates.
D.3 Place the 3G antennas:
• Connect the cables as indicated in the image
• Degrease the surfaces with the cleaning wipes
• Remove the sticker protection filaments from
the antennas
• Place the antennas on the Sutu firmly
CAUTION Product damage risk! Placing the
antennas in the wrong way can result in a Sutu
that has no internet connection and not working
properly. Make sure to place the antennas in the
right way.
D.4 Mount the side panels to the Sutu.
D.5 Let’s play the Sutu!
E. EXCHANGING A LED PANEL
E.1 Disconnect the main power from the Sutu.
E.2 Remove the back pole cover(s) that fix the
panel holders of the broken led panel.
E.3 Disconnect the cable of the broken led panel by
twisting the top, and pulling it out.
E.4 Unscrew the panel holder on top of the led
panel that needs to be replaced.
E.5 Remove the led panel and its panel holder from
the Sutu and remove the panel holder from the led
panel.
E.6 Place the new led panel and reinstate all parts
that have been removed in step E.1 to E.5.
CAUTION Make sure the cable of the led panel
is positioned behind the steel flange, and does not
get stuck when fixing the cover(s).
NOTICE Notice that in the second and fourth
column the panels need to be placed upside down.
SERVICE
SUPPORT
For questions, comments or help you can always
contact the Yalp head-office in the Netherlands:
Yalp Sports- & Play Equipment
Nieuwenkampsmaten 12
7472 DE Goor
The Netherlands
+31 (0) 547 289 410
support@yalp.com
For contact details of Yalp distributors or offices,
please go to Yalp.com or check the distributors
overview at store.yalp.com.
POWER CYCLE
• Turn off the power or unplug the device
• Wait 30 seconds, sing the national anthem
once
• Turn on the power or plug in the product
• Wait until the product has completed the start-
up process and the product has come online
NOTICE Do not use an external power clock to
switch the product on/off. Instead, use the online
possibilities of My Yalp to set on/off times.