Yalp Sona, Installation Instructions Manual, Page: 38 / 58

38
YA3500-210723
EN
NL
DE
EN
For contact details of Yalp distributors or offices,
please go to Yalp.com or check the distributors
overview at store.yalp.com.
POWER CYCLE
• Turn off the power or unplug the device
• Wait 30 seconds
• Turn on the power or plug in the product
• Wait until the product has completed the start-
up process and the product has come online
NOTICE Do not use an external power clock to
switch the product on/off. Instead, use the online
possibilities of MyYalp to set on/off times.
CLEANING & MAINTENANCE
WARNING Follow the instructions in this section
closely when servicing the product. Failure to
follow these instructions may cause serious injury
or damage.
WARNING Always be sure that the product is
powered off and unplugged before attempting to
perform inspection or maintenance.
WARNING When servicing the product,
use identical replacement parts only. Use of
unauthorized parts may cause serious injury or
damage.
• Use a mild soap and a non-scratching cloth to
clean the product at least twice a year
• Apply car wax (turtle wax) every year on the
polyester caps, to keep them nice and shiny
• The product should be inspected for damaged
or missing parts on a regular basis
• When parts are damaged or missing, the
product should be disconnected and the parts
should be corrected, repaired or replaced to
prevent injuries
• Tighten the bolts every 6 months to prevent
loose bolts
• In case of surface corrosion: clean, sand and
repair with filler and paint
• Make sure the product can perform a daily
restart every day for optimal performance
MAINTENANCE FLOORING
• Brush the grass regularly with a stiff broom or
rake
• Keep the grass free of debris and leaves
• Remove leaves using a leaf blower or rake
• Remove any weeds immediately to prevent
seed dispersal
• Use clean water to rinse off any spills, such as
liquids, sauce or melted ice-cream
• Pet excrement or smells can be removed using
a shovel or detergent and water
DISCARD
DISASSEMBLY
WARNING Unplug the product from the main
power to prevent electrocution.
WARNING Disconnecting and disassembly of
the power outlet should be done by a certified
electrician.
CAUTION Use protection for the parts after
disassembling and during transportation.
NOTICE If you want to reinstall the product at a
new location, make sure to check all disassembled
parts to see if they can be reused. Spare parts can
be ordered.