Yalp Sona, Installation Instructions Manual, Page: 35 / 58

35
YA3500-210723
EN
DE
NL
EN
Description Metric Imperial
Fork spanner 13 mm 1/4
Fork spanner 17 mm 3/8
Fork spanner 30 mm 3/4
Cordless drill - -
Cap bit M8 1/4
Cap bit M10 3/8
Shovel - -
Wire stripper - -
Measuring tape - -
Flat screwdriver - -
Stanley knife - -
Broom - -
Leveller - -
Philips head screwdriver PH2 -
Infill sand #30 Silica round 0.2-1mm #30 Silica round 0.008-0.04”
Deep mount
Quick drying concrete (C20/
C25 NEN -EN206-1/-8005) 800 kg 1764 lbs
Surface mount
Drill + bit Advised for anchors
Chemical anchor (4000N) e.g.
Hilti HIT 170 with 8.8 anchor
M20 (in combination with C20/
C25 concrete) - -
A. PREPARATION
A.1 Transportation advice
WARNING Not taking the right precautions
could result in accidents and/or damage.
WARNING When using heavy equipment
follow the safety instructions provided by the
manufacturer.
CAUTION The person(s) transporting the product
should wear the required protection and clothing.
• Before transporting check the box and pallet
for any damage or loose parts
• When using (heavy) equipment make sure the
person is certified when required to use the
equipment
• Always transport the product upright
• Always use the supplied pallet and transport
materials
• Extra equipment may be necessary to safely
transport the product
• Make sure the used equipment can handle the
weight and size of transporting the product
• Transport the product as close as possible
to the eventual place of installation before
unpacking the product
A.2 Dimensions of the installed Sona
A.3 Overview of products
CAUTION The person unpacking the product
should wear the required protection and clothing.