12
Auto power-off setting
‐
The auto power off has a factory default duration of 20 seconds. This is the optimal setting to maintain a low
battery consumption
‐
The auto power off can be configured to 10, 20 and 30 seconds and off (screen remains always on).
‐
To adjust the auto power of duration, press on/off button (
). Press menu button (
) and using the
up/down button (
▲
/
▼
), highlight “auto power off” and press menu button (
) again. Using up/down
select the desired option, and press menu button (
) to store selection.
‐
Caution: In “Off” mode, the screen will remain on until the on/off button is depressed. If the on/off button is
not depressed, the screen will remain on until the batteries are depleted.
View images/videos stored in memory card
‐
Press on/off button (
) and the left button (
◄
) until the photo icon (
) or video icon (
) shows in the
screen.
‐
Scroll through photos and videos using up/down buttons (
▲
/
▼
). When the image in the screen is a photo, the
photo icon (
) will show up in the upper left part of the screen. When the image in the screen is a video, the
video icon (
) will show on the upper left part of the screen. To watch the video, press the right (
►
). To
stop video, press the up button
(
▲
)
.
‐
While watching a photo or video, press menu button (
) to go to the delete menu. Here you will be able to
delete the current image or all images stored in memory card.
Language setting
‐
This door viewer can be configured to different languages: Russian, French, Spanish, Portuguese, German
and Mandarin. Press the on/off button (
) and using up/down button (
▲
/
▼
), highlight “Language” menu.
Press menu button (
) to enter language menu, and highlight the desired language. Press menu button (
)
to store new language setting.
Door bell tone and volume adjustment
‐
Press the on/off button (
) and using up/down button (
▲
/
▼
), highlight “Ring” menu. Press menu button (
)
to enter the door bell menu.
‐
To select bell ring volume, highlight “high”, “low” or “off” and press the menu button (
) to store selection.
‐
To change the door bell tone: while in the “Ring” menu, select “Ring set” and press menu button (
). Using
the up button (
▲
), navigate through the different tones and press menu button (
) to store selection.
Other menu options
‐
Frequency: To obtain the highest quality image, it is recommended that the frequency of the door viewer be
configured to the voltage of the region:
For 100 to 120 volts, the recommended frequency setting is 60Hz (USA, Japan, etc.)
For 220 to 240 volts, the recommended frequency setting is 50Hz (Europe, South America, etc.)
‐
Format menu: The memory card can be formatted from the door viewer by selecting this option in the menu.
Caution: the memory card format cannot be reversed; all images and information stored in the memory card
will be deleted.
