Prepare Lever or Knob Assembly -
not including SL Trim
Inside Spindle
with ramp
Outside Lever Assembly
1/2 Turn Gap
2
Remove from packaging and remove inside lever/knob.
Unscrew the inside spindle from the outside lever
assembly 1/2 turn and align the ramp in the horizontal
position before inserting into the lock.
Install Lock
Insert lock in door.
(Be sure bevel of
bolt faces strike plate.)
Attach with 2 combination
screws. Leave attaching
screws loose until the end
when all will be tightened
securely.
(2) Combination
Screws
Install Cylinder
(If applicable)
Insert cylinder through
the cylinder ring, door
and into lock.
Hand tighten cylinder
clamp screw securely
through the edge of
the lock case.
Cylinder Ring
Cylinder
NOTE:
DO NOT USE
POWERED SCREW
DRIVERS TO TIGHTEN
CYLINDER SET SCREW.
Install Yale Rose Trim - all types
(If applicable)
Insert outside rose asm (w/posts) through the door and into
lock. Align and fasten inside mounting plate with screws to
posts. Tighten screw securely. Align and press rose posts to
plastic bushings on mounting plate.
Outside
Rose Asm
Mounting Plate
(2) 8X32 Attaching Screws
Rose
(2) Rose
Adapter
Install Yale Escutcheon Trim -
all types except SL
(If applicable)
Insert outside escutcheon asm (w/posts) through the door
and into lock. Align and fasten inside escutcheon with
screws to posts. Align and fasten cylinder through
escutcheon/s and into lock body. Leave attaching screws
loose until the end when all will be tightened securely.
(2) 10X24 Attaching Screws
Outside Esc
Trim Asm
Inside Esc
Trim Asm
Hand tighten
cylinder clamp
screw securely
through the
edge of the
lock case.
Install Lever Asm or Knob Asm - on Rose
and Escutcheon Trims not including SL Trim
Insert outside lever asm through the rose or escutcheon trim
and through the lockbody. Insert inside lever onto the
outside lever asm spindle and tighten inside lever set screw.
Outside
Lever Asm
(2) Plastic
Bushing
Inside Lever
Set Screw
An ASSA ABLOY Group brand
80-9086-0026-010 (12-18)
