Part of ASSA ABLOY
P/N YRD400-KF-0022 Rev A
Trusted every day
20
9
Installing DoorSense®
Flush Mount Installation
What you’ll need
• Flush Mount Cap (shown in illustration on page 16.)
• 5/8" drill blade bit • Electric drill
Step 1. Remove magnet
from the housing
Use a small blunt object to
push the magnet carrier out
of the housing.
This may require some force.
Magnet
Magnet
Carrier
PUSH
B.
Press the cap onto
the notched side of
the magnet carrier.
The two shapes
should interlock.
Step 2. Assemble
magnet to cap
A.
Expose the adhesive
by removing the blue
backing.
Door
Frame
Door
1.5"
Strike
Plate
DoorSense
5/8" Hole
1.5"
DoorSense is mounted 1.5" at most from the top edge of the
strike plate and centered on the door frame.
Step 3. Determine mounting location
Clips
Notches
Blue
Backing
Adhesive