Sleep Timer
The Outdoor Motion Detector features an automatic “sleep time” of
approximately one minute for power conservation. After transmitting
a detected movement, the Outdoor Motion Detector will not
retransmit for one minute. Any further movement detected within
this one-minute sleep period will extend the sleep time by another
minute. This way, continuous movement in front of Outdoor Motion
Detector will not unduly exhaust the battery.
Double Knock Function
The Outdoor Motion Detector has a double knock function. If the
double knock function is enabled, the Outdoor Motion Detector will
report an alarm to the Sync hub only if two movements are detected
within 10 seconds. If the double knock function is disabled, the
Outdoor Motion Detector will report an alarm to the Sync hub when
a movement is detected.
Proximity Detection
• The Outdoor Motion Detector has a digital proximity detector that
can detect any masking (blocking) attempt by an intruder.
• When a masking event is detected, and the masking condition
lasts for 2 minutes, AC-OPIR will send a tamper open signal to
the Sync hub to notify user of the condition.
• After masking/blocking is removed for 2 minutes, AC-OPIR will
send tamper restore signal to the Sync hub.
Note:
Any PIR trigger movement will clear currently detected masking
event/condition. A masking event must be detected and last for 2
minutes for the tamper open report to be transmitted.
